The modern built-in system offers high levels of security by night, yet disappears during the day. With the shutter housing and guides designed to fit unobtrusively into the wall, the system is not visible when not in use and the architectural look and design of new buildings remains unspoilt.
With the development of this system and its increasing popularity among architects and there clients, it surely heralds the end of the unsightly traditional shutter, once so common on commercial developmentsm, offices, schools, medical centres and factory units.
As one of the UK's leading manufacturer and suppliers of roller shutters, we are ideally positioned to provide quality built-in systems for a wide range of applications.
Curtain :-
38mm double skin extruded aluminium non-vented lath with lateral movement contained by nylon ends with a bottom rail and weather seal to suit. Alternatively vented or non-vented foam filled lath can be used.
Shutter Housing :-
The shutter housing is of PVC honeycomb construction for strength and maximum insulation. This modular system has die-cast aluminium plates to carry the weight required for each shutter. The internal fascia panel is attached by a snug fit clip design for draught proofing.
Guide Channel :-
Constructed from extruded aluminium with an internal box section for strength and installation complete with nylon brush seals for smooth operation.
Electrical Operation :-
The operation is by one of the following - Single Phase Tubular Motors 240V, Rod Crank or Spring Assisted. All motors are supplied by Somfy, the world leader in shutter automation.
Electrical Optional Extras :-
Key Switch, Rocker Switch, Remote Control, Group Commands.
Finish Options :-
Our standard curtain colours are white, beige or brown. Standard guide colours are white or brown. However, the curtain and guide sections can be powder coated to any BS or RAL colour you may require to compliment your specific design.
Dimensions :-
Electrical security shutters have a minimum width of 750mm.
Spring assisted shutters have a minimum width of 1000mm